Henley Skellig Boiler Baffle PlateThe baffle plate in the Henley Skellig Boiler stove acts as a throat plate, sitting above the firebox to direct heat back down into the chamber before it escapes up the flue. Over time, the intense heat causes the plate to warp or crack, reducing draw and burning efficiency. Replacing it with this cast iron part restores correct heat flow and protects the boiler system from overfiring. Compatible with: Henley Skellig Boiler stove (8kW boiler version)

supporting the fuel bed while allowing spent ash to fall through into the ash pan below

Both hinges should be replaced together to ensure the door hangs level and to avoid uneven load on the new parts

directing combustion gases towards the baffle plate above

Part type: Ash pan (older version)

This increases heat output and fuel efficiency

A warped or cracked grate frame causes the fuel to sit unevenly and disrupts airflow through the firebox

Remove the fire fence and lift the baffle plate upward to extract it from the firebox

This set is cut to the correct dimensions for the Precision III and drops in without modification

as later single-door Beckett variants use a different glass size

The boiler inner grate for the Hi-Flame Graphite Inset Boiler sits inside the grate frame and holds the fuel directly above the ashpan

Lilyking 659 Non-Boiler stove

If yours is cracked