Alpha HSS Tap Set UNF-5/8x18 UNFHS58INTERMEDIATE taps have a lead of four threads and are used in most general purpose applications. Alpha Intermediate taps can be identified by the two rings on the shaft near the driving square. BOTTOMING taps have a lead of two threads and are used when tapping blind holes. Usually preceded by a taper or intermediate tap. Alpha bottoming taps can be identified by their plain shaft, they have no rings on the shaft near the driving square. Diameter: 5

Length   180MM (7")

breaker bar or power drive etc

- up to 30 % longer tool life and improved utilization of the abrasive

Applications: Cutting sheet metal

Weight holds up to 150kg -

Maintain maximum current flow and promote longer battery life

and is recommended when the application temperature is below 15°C

5mm Long series Drill Bit Gold Series (OAL 137mm)

5/16in Included Angle Carbide Burr

1 x Pkt of 25 Black Colored Cable Ties - 750mm x 9mm

Selected solvents

It has a fixture time on steel of 30 min