Woodturning lathe, Heavy dutyI have this lathe which i bought as part of a workshop clearance, its basically the same as the Jet Axminster 1642, the bed is 66" 1670mm long, you can turn 42" 1050mm between centres and 18" 460mm diameter over the bed. Using the additional bed extension bolted to the leg along with additional banjo and toolpost riser and with the headstock slide along you can then turn 30" 760mm diameter. The lathe has a 1. 5kw motor with the usual accessories as

Finish:Gloss / MattApplication:ExteriorCoverage:First coat 10-12 m2/litre

and 14 increments offers every woodturner an extremely wide range of scope for precise drilling

Other chuck threads and toolpost diameters are available

The tool comes with a torx key and round bar tip holder for sharpening the tip

meaning that more of it stays on the surface and less of the finish is needed

brush or spray it dries in about 20 minutes

A special blend of carnauba and microcrystalline waxes for a super high gloss finish

Great for small

'medium' Nylon threads impregnated with silicon carbide grit for deburring and surface treatment of metal and wood

6mm carbide on a 10mm stainless steel straight bar

Easy application

with the flute down and the handle low